Water Separators

Water separators are designed to remove water droplets and particles from compressed air and gases. Thanks to our unique design, centrifugal force is generated, allowing waste to be discharged with very low pressure difference, ensuring maximum energy savings. Aydın Trafo Compressor's aluminum body water separators are offered in a wide range of products, including line-type separators up to 36.6 m³/min and flanged models for higher flow rates.

Technicial Specifications

Model	Pressure Drop	Max. Working Pressure	Connections	Capacity
Model	mbar	Bar	Connections	m3/min
TMP-G 25 WS	50	20	1/4"	0,41
TMP-G 100 WS	50	20	1/2"	0,83
TMP-G 200 WS	50	20	3/4"	1,66
TMP-G 300 WS	50	20	1"	3,33
TMP-G 600 WS	50	20	1 1/2"	5
TMP-G 1200 WS	50	20	2"	20
TMP-G 2200 WS	50	20	3"	36,6

TMP-GWS Correction Factor
Pressure (Bar)	Coefficient
1	0,50
3	0,71
5	0,87
7	1,00
9	1,12
11	1,22
13	1,32
15	1,44
16	1,57
20	1,63

Model	Pressure Drop	Max. Working Pressure	Connections	Capacity
Model	mbar	Bar	Connections	m3/min
TMP-F 2500 WS	50	14	DN80	41,66
TMP-F 3200 WS	50	14	DN100	53,33
TMP-F 4300 WS	50	14	DN100	71,66
TMP-F 6500 WS	50	14	DN150	108,33
TMP-F 8500 WS	50	14	DN150	141,66
TMP-F 11000 WS	50	14	DN200	183,33
TMP-F 14000 WS	50	14	DN200	233,33

TMP-FWS Correction Factor
Pressure (Bar)	Coefficient
1	0,50
3	0,71
5	0,87
7	1,00
9	1,12
11	1,22
13	1,32
14	1,38

TMP-GWS is a pipe-type separator, while TMP-FWS is a flanged separator.To find the most suitable model with high efficiency, multiply the flow rate in the table above by the correction factor corresponding to the operating pressure. Aydın Trafo Kompresör reserves the right to make changes without prior notice.